For catering to the need of remote management and in-line power, PLANET releases two new Web Smart PoE (Power over Ethernet) Switches, the FGSW-2620PVS and FGSW-2402PVS.
Inherited from PLANET FGSW-2402VS and 2620VSF, the PLANET FGSW-2620VS provides 24 10/100Mbps Fast Ethernet ports and 2 fixed 10/100/1000Mbps ports (either Gigabit copper or SFP). And the FGSW-2402PVS offers 24 10/100Mbps Fast Ethernet ports with 2 open slots (port25, 26). The two open slots can be installed by optionally 10/100Base-TX port, 1000Base-T port, 100Base-FX, or 1000Base-SX/LX fiber-optic interfaces. The distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, ST or SC), up to 70 kilometers (Single-mode, SC / WDM / SFP).
Both switches are equipped with non-blocking 8.8Gbps backplane greatly simplify the tasks of upgrading your LAN to cater to increased bandwidth demands. The PoE, in-line power, following the standard IEEE802.3af, make the both switches able to power 24 PoE devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire.
For efficient management, the Web Smart Switch is equipped with console and Web interface and can be programmed for basic switch management functions, such as port speed configuration, Port Trunking, VLAN, Port Mirroring, QoS, bandwidth control, PoE power inject priority and Misc Configuration including IP, password settings.
The Switch provides port-based VLAN (including overlapping). The VLAN groups allowed on the switch will be maximally up to 26 for port-based VLAN. Via supporting port trunking, the Switch allows the operation of a high-speed trunk connecting to multiple ports. The Switch also provides seven groups of up to 4-ports for trunking, and it supports fail-over as well.
Product Application
Department/ Workgroup PoE Switch
Providing up to 24 PoE, in-line power interface, the switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 24 cameras/AP can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office.
Without the power-socket limitation, the switch makes the installation of cameras or WLAN AP more easily and efficiently.
Key Features
Complies with the IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab Gigabit Ethernet standard, IEEE802.3af Power over Ethernet standard
24-Port 10/100 Mbps Fast Ethernet ports with PoE support
2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface connection varied by media and distance (FGSW-2420PVS)
Either 10/100/1000Base-T or SFP (mini GBIC) Gigabit Ethernet for flexibility install and extension (FGSW-2620OPVS)
Each RJ-45 ports support auto-negotiation -10/20, 100/200Mbps, auto MDI detection
Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex)
High-performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
6K MAC address table, automatic source address learning and ageing
4 Mbit embedded memory for packet buffers
Console and Web interface for Switch basic management and setup
Support up to 26 port-based VLAN groups
Support up to 7 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth
Port mirroring allows monitoring of the traffic across any port in real time
Support QoS and bandwidth control on each port
Power injection priority support for order of power feeding to the remote equipments
